contact info
- Email: contact@kibitec.com
- Phone number: +356 7777 1522
- VAT: MT26624619
- Reg No: C92998
Revolutionary design,
in just 3mm.
Schedule a meeting at our showroom
DISTINCTIVE DECORATIVE
COATINGS
Microcement is a medium to fine-grained cement. It is made up of binders, additives, bactericides, and color pigments.
It’s flexible and resistant and doesn’t need joints.
It is an ideal material for both exterior and interior surfaces; applicable on floors, walls, ceilings, and stairs.
Fancy?
Stylish?
Microcement.
The versatility
of infinite creations.
AUTHENTIC.
ELEGANT.
UNIQUE.
What people say
One of this material’s most significant properties is its high resistance and hardness; is highly resistant to traffic, knocks, scratches and sunlight.
Yes, microcement can be applied on rooftops. We will need to do a liquid membrane/waterproof coating underneath and then we’ll be applying microcement. The surface will be non-slip and therefore safe.
Microcement can be applied to almost any type of support: cement mortar, self-leveling, terrazzo, marble, tile, plasterboard-Pladur, or plaster, on both vertical and horizontal surfaces in interior and exterior spaces.
Never apply on natural wood or supports made of various sections which will distend differently.
The support must be consolidated and stable.
The surface must be dry and free of dust or grease.
The planimetry of the support will determine the final result.
Yes, but before applying it, a heating protocol must be carried out in order to avoid the possibility that expansion, produced by the temperature changes in the floor, will crack the microcement itself.
The use of a sealer as a final coating will ensure a water-proof capability. Microcement may be applied to sinks, bathtubs, or wet areas, but the surface must always be sealed.
Yes, depending on the type of microcement used and the texture achieved, any non-slip surface is obtainable.
An application of Microcement can be carried out between three to five days. To walk over the floor surface, we recommend waiting for 6 to 7 days.
No, it is unnecessary, since the application creates only 1 to 3 mm of thickness over the surface.
To contact Kibitec about your project, please complete the email form below.
Brand your rooms with a unique and personalized touch, thanks to the different textures (thick, medium, or fine), the great variety of colors, the different varnish finishes (matte, satin, or gloss), or metallic-effect paints and glazes. Its handcrafted application makes the result of each project unique and unrepeatable because no two surfaces will be the same.
To contact Kibitec about your project, please fill-up the form below.
Copyright © 2023 – Kibitec Ltd